RLP
Pneumatic in-line hole punch
Row punching machine for the efficient punching of blanks for sheet metal insulation.
The machine is driven by a pneumatic cylinder which is actuated by a foot control valve and the punching units are used to hold the hole cuts (punch and die) and can be moved on the machine table. The number of punching units and the diameter of the hole cuts (2.5-6.0 mm) can be adapted to the respective requirements.
The distance of the holes from the edge of the sheet (overlap) is infinitely adjustable by means of width stops. Good support of the sheets to be punched is ensured by a continuously extendable table extension.
- 1 length stop and 3 width stops
- Pull-out table extension
- <
- Effective length 1270 mm
- Sheet thickness up to 1.0 mm
- Punching units: 6
- Punch diameter: 3.3 mm
- Projection of punching units: 40 mm
- Minimum hole spacing: 60 mm
- Width stops: 3
- Operating pressure 8 bar
- Air consumption per stroke 8.8 liters
- Net weight approx. 140 kg
- Through-feed punching process with extended stop rail
- Reinforced design for heavy-duty use
<
<
- Additional punching units with hole cutting
- Fixed stops for overlap: 12.5 / 15 / 25 mm
Working length
1270 mm
Sheet thickness up to
1,0 mm
Punching units
6 Pieces
Hole cut
3,3 mm
Overhang of the punching units
40 mm
Smallest hole distance
60 mm
Width stops
3 Pieces
Operating pressure
8 bar
Air consumption per stroke
8,8 bar
Net weight approx.
140 Kg
Similar products
Product Inquiry
You might also be interested in
Schwartmann’s cosmos
SCHWARTMANNS
CARE 360
With Schwartmann’s Care 360, your machine remains in predictable operation. This includes software maintenance, updates, remote support and direct technical assistance, supplemented – depending on the package – by annual on-site system maintenance. This ensures that inspections, maintenance and servicing remain predictable, rather than becoming a cause for disruption.
WE ARE HERE FOR YOU!
Feel free to contact us
I am at your disposal for all questions concerning our machines and services. Give me a call, send me an email directly or use our contact form. We will get back to you as soon as possible.
MARCEL SCHWARTMANNS
Managing Director | Service & Marketing