WSRN 01.1 and 02.1
Roll bending machine with manual drive
These roll bending machines are especially suitable for use on building sites and in training workshops due to their robust construction, easy handling and low weight.
They are driven by a handcrank directly on the bottom shaft. The working shafts are arranged asymmetrically, spherically turned, and are held in place by maintenance-free dry plain bearings. The clutch gears are to the left, so that even narrow pipes can be easily pulled off.
The top shaft can be swung out one-handed toward the front and is locked by a closed blocking bearing. The bottom and back shafts can be adjusted from the right, outer side of the machine. The bottom shaft advances via handle and hand levers, the back shaft advances via ratchet lever and tooth segment.
The settings can be easily reproduced via the sensitive tooth segment. The back shaft can be tilted for conical rounding.
- Base
- lock seam groove in top shaft
- grooves for laying wires
Type
WSRN 01.1
WSRN 02.1
Working length
1020 mm
1020 mm
Sheet thickness up to
0,80 mm
1,00 mm
Shaft diameter
45 mm
50 mm
Net weight approx.
90 Kg
97 Kg
Similar products
Product Inquiry
You might also be interested in
Schwartmann’s cosmos
SCHWARTMANNS
CARE 360
With Schwartmann’s Care 360, your machine remains in predictable operation. This includes software maintenance, updates, remote support and direct technical assistance, supplemented – depending on the package – by annual on-site system maintenance. This ensures that inspections, maintenance and servicing remain predictable, rather than becoming a cause for disruption.
WE ARE HERE FOR YOU!
Feel free to contact us
I am at your disposal for all questions concerning our machines and services. Give me a call, send me an email directly or use our contact form. We will get back to you as soon as possible.
MARCEL SCHWARTMANNS
Managing Director | Service & Marketing